Tiny houses, cabins and modular buildings moved on the road legally, with the route surveyed before the day of the move.
Tiny home transport is the movement of a small dwelling, cabin or modular building by road. Because these structures are usually wider and taller than a car or a caravan, the job depends on permits, escorts and a route that can physically accommodate them.
A tiny home on a registered trailer is the simplest case, because the trailer is already engineered for the road. A cabin or transportable building that was not designed around road rules is harder: the width, the height and the towing arrangement all need checking before anyone commits to a date.
The first number to establish is the width. Standard road rules allow a vehicle up to about 2.5 metres wide, and anything beyond that starts to attract permit conditions, travel restrictions and sometimes a pilot vehicle. Height matters just as much, because power lines, tree canopies and low bridges do not move for anyone.
The second is the route. A road that looks fine on a map may have a tight roundabout, a steep crest, a narrow bridge or a set of traffic lights that a long combination cannot clear in one movement. We plan around those before the move rather than discovering them with a house on the back.
Oversize transport is a permit system, not a formality. The wider and taller the load, the more conditions attach: daylight-only travel, restricted routes, reduced speeds, escort vehicles and sometimes a police escort. Those conditions are set by the state road authority and they apply to the whole journey, including the last kilometre.
The destination is where most tiny home moves run into trouble. A beautiful rural block may have a gate narrower than the house, a driveway with a steep crown, or a power line dropping into the building envelope. Walk the last hundred metres before the move and take photos, because a structure that cannot reach its pad is an expensive problem to solve on the day.
It depends on the structure and the route. An unregistered cabin can sometimes travel on a suitable trailer or dolly under a permit, but it needs to be assessed before anyone quotes the job.
Around 2.5 metres is the usual starting point for standard road rules. Beyond that, permits, travel conditions and sometimes escorts apply, and the requirements differ between states.
Often, once the load exceeds a certain width or length. The requirement is set by the road authority for the route, and it is confirmed as part of the permit application.
It depends on distance and permit conditions. Many moves are completed in a day, but long routes with daylight-only travel can take several days.
A clear approach for a long combination, a gate wide enough for the load, no low wires or branches, and firm ground for the truck to position. Photos of the last part of the driveway are essential.
Transit coverage is arranged and set out on your quote. Read the terms before the move, and photograph the structure inside and out as a record.
An oversize move is a permit job with a route plan attached. We measure the structure, survey both ends of the journey and handle the approvals before the truck is booked.
Send the dimensions, the weight and photos of both the structure and the destination access, and we will confirm the permits and the price.