Mini excavators to 30 tonne diggers, moved on low loaders and floats with route checks, secure tie-down and insured transit.
Excavator transport is the movement of an earthmoving machine on a low loader, drop deck or float. The machine is driven or winched onto the trailer, secured with chains and binders, and carried to the next site.
The machine's weight and dimensions set everything else: which trailer is needed, whether a permit applies, whether a pilot vehicle is required and which route the truck can take. That is why a photo of the machine's compliance plate and a rough idea of the track width will get you a more useful answer than a description of the model.
Moving a digger is a weight problem before it is a distance problem. A 5 tonne machine on a trailer can travel on a standard configuration, while a 20 tonne excavator needs a float rated for the load and a route that avoids weight-restricted bridges. Guessing at either is how a job ends up parked on the shoulder waiting for a second truck.
Preparation saves time on the day. Tracks should be cleaned of mud, the bucket and any quick-hitch attachments removed or secured, the boom lowered and the machine's fuel level kept sensible. A machine that arrives at the ramp ready to load is on the trailer in minutes, while one that arrives caked in clay can take an hour and a cleanup fee.
Width is usually the first trigger. Once a machine or its trailer exceeds the standard legal width, the movement can require a permit and, in some cases, pilot vehicles or a specific travel time. Height matters too, particularly with an excavator that has a raised boom or a large cab, because low bridges, wires and tree canopies are unforgiving.
Weight restrictions are less visible but just as real. Local roads, older bridges and some rail crossings have mass limits, and an overmass movement has to be routed around them. This is why we ask for the operating weight rather than the model name: two machines with the same badge can differ by several tonnes once a bucket, ripper or extra counterweight is fitted.
It depends on the machine's weight and dimensions, the distance, the access at both sites and whether permits or escorts are needed. A mini excavator on a tilt tray and a 20 tonne digger on a float are completely different jobs.
Sometimes. Once the machine or trailer exceeds standard legal width or height, or the combination is overmass, approvals may apply. We check the requirement as part of the quote so the move is not stopped on the day.
Yes. Tracked machines are driven or winched onto the trailer and secured with chains and track tie-downs. Steel tracks need the trailer deck protected and the machine positioned carefully.
Not always. Buckets and small attachments can travel with the machine if they are secured and within weight limits. Large attachments may need their own space or a second vehicle.
It can still be moved by winch, provided the tracks roll and the brakes can be released. Tell us at quote stage and allow extra time for loading and unloading.
Most metro and regional moves are done in a day. Interstate moves depend on distance and permit travel times, and usually take two to five days.
A machine move is only as good as the trailer and the route. We confirm the operating weight, match the float to the load, check the access at both sites and handle any permit the route requires.
Send the machine's make, model and operating weight plus photos of both sites, and we will confirm the trailer, permits and price.